| dc.creator |
College of Aeronautics, (Cranfield) |
|
| dc.date |
2016-10-20T15:12:20Z |
|
| dc.date |
2016-10-20T15:12:20Z |
|
| dc.date |
1963-10 |
|
| dc.date.accessioned |
2022-05-09T10:03:01Z |
|
| dc.date.available |
2022-05-09T10:03:01Z |
|
| dc.identifier |
http://dspace.lib.cranfield.ac.uk/handle/1826/10804 |
|
| dc.identifier.uri |
https://reports.aerade.cranfield.ac.uk/handle/1826.2/4324 |
|
| dc.description |
Tools of grade N35/3 and N35/RD25 were tested to .030 in. flankwear
at cutting speeds of 500 fpm with 0.010 in/rev feed and 250 fpm. with
0.010 in/rev feed and 0.030 in/rev feed machining EN 9. The results
showed that N35/3 gave the better performance at the higher cutting speed
and that the two grades gave the same performance at the lower speed.
At 250 fpm and 0.010 in/rev feed the wear of both grades was mostly
confined to a groove at the depth of cut. With the larger feed both
grades of tool suffered severe deformation of the cutting edge. |
|
| dc.language |
en |
|
| dc.publisher |
College of Aeronautics |
|
| dc.relation |
CoA/M/M&P-7 |
|
| dc.relation |
7 |
|
| dc.title |
Test report No. PLBO/3: wear tests on PERPRO tools grades N35/3 and N35/RD25 machining EN 9 |
|
| dc.type |
Report |
|